Advanced laser Doppler technology for non-contacting area velocity flow measurement
The LaserFlow® velocity sensor remotely measures flow in open channels with non-contact Laser Doppler Velocity technology and non-contact Ultrasonic Level technology. The sensor uses advanced technology to measure velocity with a laser beam at single or multiple points below the surface of the wastewater stream.
The sensor uses an ultrasonic level sensor to measure the level and determines a sub-surface point to measure velocity. The sensor then focuses its laser beam at this point and measures the frequency shift of the returned light.
The LaserFlow is ideal for a broad range of wastewater monitoring applications. It is compatible with both the Teledyne ISCO Signature Flowmeter, DuraTracker Flowmeter, and the Teledyne ISCO 2160 LaserFlow Module, depending on the type of installation.
During submerged conditions, flow measurement continues without interruption with optional continuous wave Doppler Ultrasonic Area Velocity technology.
With its specially designed mounting bracket in place, the LaserFlow can be deployed and removed from street level. This avoids the risk and expense of confined space entry. A variety of communication options enable programming and data retrieval from a remote location. Information about data quality can be recorded and transmitted with the flow data.
Additionally, built-in diagnostic tools simplify installation, maintenance, and advanced communication options reduce site visits.
For applications within the United Kingdom requiring certification by The Environment Agency, LaserFlow is designated MCERTS Class 2.
System Versatility
From industrial applications to manhole installations, the LaserFlow offers versatile configuration options to give you the flexibility to measure flow in most open channel applications. The sensor is compatible with both the Signature flowmeter for permanent discharge compliance monitoring, and the 2160 module for everything from portable surveys to permanent installations. Both flowmeters have a variety of communication options for remote data access and programming, eliminating the need for frequent site visits.
Single or Multiple Point Measurement
Depending on your application needs, the LaserFlow device can be programmed to take velocity measurements at single or multiple points below the water's surface, producing an accurate mean velocity reading.
Remote Ultrasonic Option
In applications where the level measurement point of the built-in ultrasonic and the measurement point of the laser velocity are of different elevations, such as a freefalling outfall or drop manhole, the remote ultrasonic option can be used so that both measurement points reference the same elevation.
Due to unique site requirements, various mounting hardware is available for use with the LaserFlow sensor and 310 remote ultrasonic sensor.
Optional Submerged Functionality
During submerged conditions, when water reaches the LaserFlow, the optional bottom-mounted TIENet™ 350 Area Velocity sensor seamlessly takes over the flow rate measurement. The sensor provides ultrasonic Doppler velocity measurement and Differential Pressure level measurement. This option measures flow in the pipe/channel. By measuring velocity over a large area, the ultrasonic Doppler technology provides more accurate flow measurement during submerged conditions.
Optional Redundant Measurement
For redundant flow measurement at critical monitoring sites, a unique flexibility is added by the optional 350 sensor when mounted at the bottom of the pipe. This sensor provides redundant velocity, level, and flow data from the same site as the LaserFlow device.
Easy and Secure Retrieval/Replacement Without Manhole Entry
Following initial installation and adjustment, the sensor can be installed or removed as needed without manhole entry in most situations, using the optional sensor retrieval arm to grasp the handle.
The handle's simple yet effective locking mechanism holds the sensor securely in place, and is easy to engage and release from above ground.
Standard Features
Applications
Options and Accessories
Specifications
| LaserFlow® Non-contact Velocity Sensor | |
|---|---|
| Dimensions (HxWxD) | 14.96 x 10.3 x 22.32 in (38.01 x 26.21 x 56.7 cm) |
| Laser Class: | Class 3R |
| Temperature Range: | Operating: -20 to 60° C (-4 to 140° F)
Storage: -40 to 60° C (-40 to 140° F) |
| Flow Accuracy: | Accuracy @ 22° C
±0.006m (0.02 ft) at < 1 ft level change ± 0.012m (0.04 ft) at > 1 ft level change |
| Power Required: | Input voltage: 8 to 26V DC
12V DC Nominal |
Videos
10633 County Road 26
Blair, NE 68008