Rittal Logo

Wall-mount Stainless Steel Enclosures.

Panama NE - Rittal Stainless Steel Enclosure

Rittal WM stainless steel enclosures can be used for
virtually any application. NEMA 4X protection ratings are
ensured through a secure locking system, foamed-inplace gasket and knife-edge perimeter. Features include a body constructed of cold rolled steel, steel doors and zinc-plated mounting panels. WM enclosures are readily available in all of the most popular sizes, protection categories and configurations – including universal disconnect cutout – and a full range of accessories.

  • One-piece welded stainless steel body
  • Available 304 and 316L stainless steel
  • Flange-trough collar opening channels liquids and dust  away from enclosure gasket and enclosure interior 
  • Left-hand hinged door
  • Blind riv-nuts allow for secure mounting
  • Foamed-in-place gasket
  • Zinc-plated mounting panel standard
  • Slope top versions have 20-degree sloped roof that  overlaps the door 
  • Enclosures less than 20” in height have one   ¼ turn latch 
  • Enclosures 20 - 40” in height have two ¼ turn latches
  • Enclosures greater than or equal to 42” in height have  a 3-point latching L-handle 
  • Disconnect enclosures have a 2 or 3-point  latching L-handle

304 Stainless Steel – UL/cUL Type 12, 3R, 4, 4X. Note: measurements are approximate.

Part No. H x W x D Part No. H x W x D
WM121206N4
12x12x6WM242010N424x20x10
WM161206N416x12x6WM302410N430x24x10
WM161606N416x16x6WM303010N4
30x30x10
WM201606N420x16x6WM363010N436x30x10
WM202006N420x20x6WM483610N448x36x10
WM161208N416x12x8WM242412N424x24x12
WM201608N420x16x8WM302412N430x24x12
WM202008N420x20x8WM363012N436x30x12
WM241608N424x16x8WM363612N436x36x12
WM242008N424x20x8WM423612N442x36x12
WM242408N424x24x8WM483612N448x36x12
WM302408N430x24x8WM603612N460x36x12
WM303008N430x30x8WM363016N436x30x16
WM362408N436x24x8WM483616N448x36x16
WM363008N436x30x8WM603616N460x36x16

316L Stainless Steel – UL/cUL Type 12, 3R, 4, 4X. Note: measurements are approximate.

Part No. H x W x D Part No. H x W x D
WM121206N6
12x12x6WM242010N624x20x10
WM161206N616x12x6WM302410N630x24x10
WM161606N616x16x6WM303010N6
30x30x10
WM201606N620x16x6WM363010N636x30x10
WM202006N620x20x6WM483610N648x36x10
WM161208N616x12x8WM242412N624x24x12
WM201608N620x16x8WM302412N630x24x12
WM202008N620x20x8WM363012N636x30x12
WM241608N624x16x8WM363612N636x36x12
WM242008N624x20x8WM423612N642x36x12
WM242408N624x24x8WM483612N648x36x12
WM302408N630x24x8WM603612N660x36x12
WM303008N630x30x8WM363016N636x30x16
WM362408N636x24x8WM483616N648x36x16
WM363008N636x30x8WM603616N660x36x16
GPM Logo
Address

10633 County Road 26
Blair, NE 68008

Contacts

Western Territory
Eastern Territory

Request Information

Information or quote request

© Copyright 2012 GPM - All Rights Reserved