VPC offers a complete line of tough ENDURO fiberglass shelters that are ideal for housing samplers, generators, pumps, switch gear transformers, radio repeater shelters, chlorination equipment, emergency spill equipment, safety and even industrial equipment.
These shelters are constructed from one-piece molded fiberglass reinforced plastic, designed to withstand 130mph winds and roof loads of 30lbs per square foot.
Perfect for pumps, valves and well heads that need to be kept insulated from cold weather, the Enduro Model 50 is made for those kind of projects. This lightweight fiberglass enclosure has a front access door and can be equipped with a factory installed heater with built in thermostat eliminating any concern relating to frozen pipes and valves.
Enduro 50 shown with optional equipment, heat, light and exhaust fan.
The VPC Enduro model 50 is a perfect all-weather FRP Fiberglass Enclosure. Typically used to house sensitive equipment, the Enduro 50 can be equipped with many electrical packages. The fiberglass will not prevent the reading of electrical signals and this enclosure is often used to house communication or electrical monitoring equipment. Available in multiple colors.
Available in multiple colors.
The Enduro Model 100 was originally designed for refrigerated samplers but is used in many different applications. The flip top lid and the hinged front door allow easy access to whatever equipment or instrumentation is stored inside. Installed in Food & Beverage facilities, Paper Mills, Industrial Plants and in Coastal Areas, the M-100 is the perfection solution for your job.
37.75" x 37.75" Insulated Fiberglass Shelter used to protect refrigerated sampler.
Weather and corrosive resistant, this all fiberglass constructed shelter is rugged and durable.
Lifting lid and front swing door allows easy access to equipment and instrumentation.
The Enduro Model 150, like all of our standard enclosures, is shipped to the job site fully assembled and ready to install. Standard features include stainless steel door hardware, insulation and a perimeter base mounting flange. Electrical options such as heat, light, exhaust and outlets can be installed at our factory upon request.
Model 150 is used in the water/wastwater, telecommunications, and commercial industries.
Light installed in Enduro 150. Thru holes for conduit/pipe also shown.
Optional equipment with integral floor install in this 29 inch x 29 inch x 34 inch H enclosure.
Model 150 are stocked and available for immediate shipment.
This Green shelter is an example of the colors available for you to request.
We also can detail shelters with wrap if requested.
Designed especially to house SCADA systems, VPC's Enduro Model 1630 is fully insulated with a flip-top lid for easy and full access to your system. Whether you need to monitor and control a plant or equipment in industries such as water and waste control, telecommunications, energy, oil and gas refining or transportation, protect your system in this lightweight, durable and secure enclosure. This shelter measures 16.5" x 30" x 50" and is shipped fully assembled and ready to be installed. Need a different size enclosure for your system? Call and talk to one of our experts and let us help you. Enclosure can also be used as a backflow preventer cover, or well head, pipe and valve cover. This uninsulated enclosure is available with either an interior or exterior base mounting flange.
This VPC 1630 Eduro Shelter measures 16.5 x 30 x 50.
It is shipped fully assembled and ready to be installed.
As you see here solar panels can be easily positioned on the concrete slab to accommodate your equipment.
One of our most popular shelters, the Enduro Model 200, is widely used in a variety of applications. Storing water monitoring equipment, communications equipment, or electrical instrumentation, this weather resistant fiberglass shelter has a smooth gel coat exterior finish with UV inhibitors.
The Model 200 like all buildings have optional equipment available.
Standard electrical package to include heat, light, exhaust is factory installed.
Weather and corrosive resistant, this all fiberglass constructed shelter is rugged and durable.
45" x 45" Insulated Fiberglass Shelter used at a Waste Water Treatment Facility in North Carolina.
The Enduro 200 is the most often used fiberglass shelter in the Enuro series of shelters. The size works in applications from Waste Water Treatment to Communication to Chlorination and chemical storage.
The Model 200 arrives at the job site fully assembled. To install, simply anchor bolt through the flange to the concrete pad.
Rugged, durable and economical, the 5’ x 5’ Enduro Model 300 fiberglass shelter is transparent to both radar and radio waves and is often used in cellular or antenna shielding. Also widely used to store radar and satellite equipment, chlorination equipment and tanks, switch gear transformers and any other valuable equipment or instrumentation that needs to be protected from harsh and corrosive environments.
This roomy fiberglass enclosure, has a live load rating of 40 psf and wind load in excess of 130 mph.
This fiberglass, weatherproof enclosure allows ample room for equipment and storage.
Interior shot of Model 300 with installed electrical options.
Interior view of 8000 BTU air-conditioner installed in this Model 300.
Model 300 Chlorination Fiberglass Shelter. In stock and ready to ship.
5 x 5 Fiberglass Shelter. Used to replace ugly rusted and rotted out metal enclosure.
All Enduro 400 Model pump covers are fully insulated and are shipped completely assembled and ready to install. The Enduro 400 features tilt-back access to equipment installed inside the cover. Designed as a pad-mounted cover, stainless steel hinges are secured to the concrete pad, allowing you to tilt open the lightweight cover.
Uninsulated model 400, light weight, lift off design. 58"L x 46"W x 43"H
Enduro Model 400, tilt back, offers generous access to pipes, pumps, tanks and all weather sensitive equipment.
A series of insulated enclosures used at this LPG Storage Facility to protect piping and manifold from harsh winter weather.
What makes one Enduro 400 different from the others is access inside the cover. The Enduro 400D has front Double Door access. Door includes stainless steel hardware and locking hasp and staple. The large double doors give you well over 48 inches of open access inside the cover. Use the exterior base mounting flange to secure the enclosure to the concrete pad using anchor bolts.
The popular Enduro 400G, is a very versatile shelter able to easily access well heads, pumps, valves, and pipes. The single gull wing offers an affordable option for access to this fully insulated cover. Using stainless steel door hardware, the enclosure is finished with a UV resistant gel coat, eliminating any chance of corrosion.
Unlike the tilt-back or double door openings, one or both sides of the Enduro 400GX can be opened making access to the pump convenient! This weather proof fiberglass cover is lightweight and is delivered ready for use! Preventative maintenance and repair is made easy with the unique access this shelter provides.
Locking lid supports keep one or both sides open allowing safe access from either side.
Sized perfectly for many different pump and backflow prevention applications, the Model 411 is available in both insulated and un-insulated models. For colder applications, a heater can be installed at the factory and shipped completely ready to install. As with the entire Enduro Model 400 Series, these fiberglass shelters are non-corrosive, lightweight and long-lasting. Hinges, handles and all exterior hardware provided is stainless steel.
The Enduro 433 uses stainless steel hinges on the back of the cover producing a flip top opening into the insulated box. Prop bars hold the lid open while preventive maintenance or repair is completed. Double handles make lifting this lightweight top a breeze. Roomy inside at 49.5" x 38" x 36", the 433 is shipped fully assembled and ready to install!
The Model 600 fiberglass shelter is corrosion resistant to many chemicals and is most often used in applications where wood will rot and metals will rust. Roomy measuring a full 72 inches square, this maintenance free shelter is popular in the water and waste water, communication, industrial, electrical and municipal industries.
Our largest stocked shelter 6'x6', this unit has been used in a variety of ways.
From a small pump house to storing safety equipment, the Enduro 600 is versatile.
If it is fans, noisy equipment, or delicate equipment you prefer to shield everyone and the weather from, VPC Fiberglass can craft it. Call us today!
10633 County Road 26
Blair, NE 68008